mumbaicrusher 
:
Members
: 113
:
2018
|
The Conveyor Belt Saudi Arabia Manufacturer continuously researches the selective crushing method, and develops new crushing processes and new equipment for processing different materials (including those that cannot be effective or inefficient with traditional crushing methods), which have different purposes for different industrial uses.
If the customer does not have high requirements on the particle size of the finished stone, a two-stage jaw crushing scheme can be used for production. This configuration is a low investment, simple maintenance and repair scheme, and the production cost is economical in all schemes. However, the disadvantage of this solution is that the stone type of the stone is relatively poor, and the proportion of needle-shaped materials is high. This has led to the low competitiveness of this stone in the market, because most high-grade buildings require excellent stone types. Stone.
For customers who require the product to have an excellent grain shape, but also want to reduce production costs, we recommend that you can use the two-stage laminated crusher (such as jaw crusher + fine jaw crusher / cone crusher) and impact crusher supporting process solutions. . This configuration allows the main crushing work to be completed by head crushing and secondary crushing (laminate crushing), and then only the impact crushing is performed to shape the crushing. This configuration can make the main crushing work by head crushing and secondary crushing (lamination crushing), and only the impact crushing to carry out the type crushing. Such a configuration process can greatly reduce the anti-material formed after screening. If the anti-feeding ratio in a production line is too high, it will cause a crusher to increase too much repeated crushing work, and the wear of the wear parts will be greatly increased accordingly.
For a stone factory, if only the jaw crushing and reverse crushing process configuration is used, the wear resistance of the reverse crushed wear parts will be very fast, and the production cost will increase a lot. Therefore, as a crusher supplier, we do not recommend using this process configuration.
|
